News
The steps and methods of repairing the boat rides - 2017-03-10 14:40:37
1, the damaged surface must be clean and dry.
Glass steel surface 2, angle grinder or sand cloth will be damaged or need to bond the rough, not excessive grinding, the grinding surface is larger than that of surface damage.
3, according to the grinding surface of cut glass fiber cloth, cloth six to eight layers of muslin two layers should be pasted cloth after pasting cloth.
4, blending resin: resin: red material: white material = 100:1:2 is the basic proportion, winter can be big, summer can be smaller, factories in the resin factory prior to red material preparation, use only to the white material, resin prepared, should be used immediately, otherwise it will be the solid melt, so with glue, should be fully prepared, can be carried out in accordance with the introduction of the 1, 2, 3, 4.
In 5, the first on the grinding surface of brush glue, and then paste the two layers of cloth, continue to brush the glue to paste all wet cloth and two layers, until the layers of the cloth so far.
6, no rain cool sun 12-24 hours as well, and then use the water.
7, a variety of liquid chemicals, the skin has a slight burn force, try to avoid direct touch.
1, the damaged surface must be clean and dry.
Glass steel surface 2, angle grinder or sand cloth will be damaged or need to bond the rough, not excessive grinding, the grinding surface is larger than that of surface damage.
3, according to the grinding surface of cut glass fiber cloth, cloth six to eight layers of muslin two layers should be pasted cloth after pasting cloth.
4, blending resin: resin: red material: white material = 100:1:2 is the basic proportion, winter can be big, summer can be smaller, factories in the resin factory prior to red material preparation, use only to the white material, resin prepared, should be used immediately, otherwise it will be the solid melt, so with glue, should be fully prepared, can be carried out in accordance with the introduction of the 1, 2, 3, 4.
In 5, the first on the grinding surface of brush glue, and then paste the two layers of cloth, continue to brush the glue to paste all wet cloth and two layers, until the layers of the cloth so far.
6, no rain cool sun 12-24 hours as well, and then use the water.
7, a variety of liquid chemicals, the skin has a slight burn force, try to avoid direct touch.
